FREE SHIPPING ON USA ORDERS OVER $250!

www.etspec.com

SKU: 034-202-1012

034 ROD BEARING SET, COATED, AUDI V6 AND 2.7T

Regular price $170.00 USD
Sale price $170.00 USD Regular price
Sale Sold out
Unit price
/per 
Shipping calculated at checkout.
This is a pre order item. We will ship it when it comes in stock.

034 ROD BEARING SET, COATED, AUDI V6 AND 2.7T



Coated rod bearing set for the Audi 2.7T and 2.8L12V / 30V V6 motors.

First we start with an OE rod bearing set, then coat them with the most advanced anti-friction coating available.

Dry film lubricant that is technically engineered to withstand extreme performance pressure. Using coated engine bearings increases horsepower and efficiency, extends bearing life - and in the case of oil pressure loss, provides protection to bearings longer to prevent immediate overheating and galling of crank journal surfaces.

In stock at standard sizes, oversizes available upon request.

 

Fitment:

  • 1996 - 2001 Audi A4 (B5)
    • 2.8L
  • 2000 - 2002 Audi S4/RS4 (B5)
    • 2.7T
  • 1998 - 2004 Audi A6 (C5)
    • 2.7T / 2.8L
  • 2001 - 2003 Audi Allroad (C5)
    • 2.7T
  • 1998 - 2005 Volkswagen Passat (B5 / B5.5)
    • 2.8L

Please Note: These bearings will fit 2.7T RS4 if using 2.7T rods, 2.7T S4 and RS4 use essentially the same crank, only the RS4 rod has a smaller big end ID.  Use a rod designed for the 2.7T S4 with these bearings and you have a perfect match for the RS4.

034 ROD BEARING SET, COATED, AUDI V6 AND 2.7T



Coated rod bearing set for the Audi 2.7T and 2.8L12V / 30V V6 motors.

First we start with an OE rod bearing set, then coat them with the most advanced anti-friction coating available.

Dry film lubricant that is technically engineered to withstand extreme performance pressure. Using coated engine bearings increases horsepower and efficiency, extends bearing life - and in the case of oil pressure loss, provides protection to bearings longer to prevent immediate overheating and galling of crank journal surfaces.

In stock at standard sizes, oversizes available upon request.

 

Fitment:

  • 1996 - 2001 Audi A4 (B5)
    • 2.8L
  • 2000 - 2002 Audi S4/RS4 (B5)
    • 2.7T
  • 1998 - 2004 Audi A6 (C5)
    • 2.7T / 2.8L
  • 2001 - 2003 Audi Allroad (C5)
    • 2.7T
  • 1998 - 2005 Volkswagen Passat (B5 / B5.5)
    • 2.8L

Please Note: These bearings will fit 2.7T RS4 if using 2.7T rods, 2.7T S4 and RS4 use essentially the same crank, only the RS4 rod has a smaller big end ID.  Use a rod designed for the 2.7T S4 with these bearings and you have a perfect match for the RS4.